:	Jul 14, 2004

:

If the tire pressure module is to be replaced then T4 must be connected and the correct procedures adhered to, prior to battery disconnection.

.

Disconnect the battery ground cable.

.

Remove the LH A-pillar upper trim panel.

.

Remove the LH B-pillar upper trim panel.

.

Remove the LH C-pillar upper trim panel.

.

Remove the LH sun visor.   Remove the cover.   Remove the 2 screws.   Disconnect the electrical connector.

.

Remove the sun visor retaining clip.   Release the screw cover.   Remove the screw.

.

Remove the LH passenger assist handles.   Carefully release the 6 screw covers.   Remove the 6 screws.

.

Release the LH side of the headliner.   Release the 6 clips.

.

Remove the low tire pressure module.   Disconnect the 2 electrical connectors.   Remove the 2 bolts.

.

Install the low tire pressure module.   Tighten the bolts to 10 Nm (7 lb.ft).   Connect the electrical connectors.

.

Secure the LH side of the headliner.   Carefully secure the clips.

.

Install the LH passenger assist handles.   Install the screws.   Install the screw covers.

.

Install the sun visor retaining clip.   Install the screw.   Install the screw cover.

.

Install the LH sun visor.   Install the screws.   Install the screw covers.   Connect the electrical connector.

.

Install the LH C-pillar upper trim panel.

.

Install the LH B-pillar upper trim panel.

.

Install the LH A-pillar upper trim panel.

.

Connect the battery ground cable.